PRINT INDUSTRY FORUM

Spinning-Weaving-Dyeing-Finishing-Printing-Knittin g & EMbroidery Machinery

Gentlemen / Madam :
Good Day !

We are pleased to offer you the following :

LIST OF SPINNING - DYEING- WEAVING - KNITTING - FINISHING & EMBROIDERY M/Cs

DYE MACHINES For Hosiery / Knitted Fabrics

6 units- Scholl Vertical Dye Machine Model Colorstar, 2 Tube Split/Split 600
kg, , Year 1991/ 92, Barco Sedo Controller, with Add Tank with
Mixer, Heat Exchanger, Loading and Unloading Reel, Operator Platform,
all Pumps and motors.

2 Thies Roto-Lufts Dye machines - Year:2002
One of 6 Port -1200 Kgs
One of 4 Port - 900 Kgs

Machine with manifolds for: Heating and Cooling, Condensate and hot water return, blending and safety valve, seam detector for 1 strand, maintenance catwalk, operating platform, combined cool rinse with booster, pump, liquid MPI, dry salt dissolving, add tank, Teflon in kier, AC Inverter, Blend valve, control panel (with main, disconnect and starter to bypass inverter) with fuse bottom tangle meters, blend water control, fabric speed timer, programmable nozzle pressure and lifter reel speed, dry salt control, platform

HOSIERY FINISHING :

One TubeTex Pak Nit II 40" Width Tubular compactor - Year : 1989. Few Spares avaiable . (SOLD)

One Tubetex PakNit II 50" Wide Compactor for Tubular type Knitted Fabric - Year:1995 - Equipped with Metal Detetctor .

One Complete Line of finishing of HELIOT - France consisting on Dryer & Balooning type Hydro Extractor with Syncronised System. Width : 50" Year : 1993.

One Open Width TUBETEX C-2000 88" Wide With Tentering Frame - Year:1991 - (SOLD)

One SANTEX SANTA SHRINK Jumbo Dryer - Year:1991 - Steam Heated - 5 Zones - Width: 120" - Single Pass . Total Production per Day : 14 Tons . Still in Production .

STENTER FRAMES :

>1 Santa Lucia Tenter Frame, year 1999 consisting of:
> Enters over a 2 Roll Tension Deivce, Bianco Driven Spreader Roll, 86"
> wide, (4) Plastic Storage Tanks, 1,000 L, with stainless steel pipes,
> mounted on steel grate platform, 10x10, (8) Nevco valve controllers.
> Bianoc 2- Rubber Roll Pad, 87" wide, S/N 990684, year 1999, with single
> dip pan, driven scroll roll entry 2 rubber roll nip, pneumatic. Santa
> Lucia Tenter Frame, gas fired, S/N 1349, Type RED.V.EVO.3.5, year 1999,
> 86" wide x 94' long, overfeed, Tandematic plate guides, Erhardt & leimer
> Type FR5501 optical/electricrail guides, pinning brushes, vertical pin
> chain, center support system to support the fabric before entering the
> oven, steam section for pre-steaming the goods before reaching the oven,
> entry is 19' before the oven , gumming device. Oven is a low profile,
> gas fired, 66' long oven, with 5 heating zones, 5 Honeywell gas burners
> per side of the tenter frame housing for a total of 10, each burner has
> a combustion system, energy saving motor, which is rated at 3HP, there
> are 10 of these, rated at 8,000,000 BTU's per hour, per burner. 5 blower
> motors pre side, each blower motor is a14.7 HP, 600 volt, 60 cycle,
> variable speed motors, 2 exhaust fans( 1in the entry and 1 in the exit
> fo the tenter frame), motor on the exhaust blowers are 9.2HP, ABB
> motors, 3' Cooling Section, Exit Trimmers at the exit of the tenter
> frame, overhead Plaitor, Mahlo Moisture Monitor System (Gravimat
> 6270/61), all motors and controls.
> Total length of th frame is "119' long x 23' wide x 11'2" high.

One Stenter Frame Babcock,Germany.

-Yom: 1995 years
-Type: 5358-1600(Auftr number:94175 165595)
-Roller width:3,200 m/m
-Working width:3,000 m/m
-Nos,of chambers:6 chambers
-Heating method: thermo oil heating
-Chain: Pin type (horizontal conveyer type)
-with gumming device(AMK)
-with Tandematic device
-with selvedge cutting device
-without weft straightner
-Inverter driving method.

Comprised of :

* Entrance
*Texter guide(Bianco)-1 set
*2 bowl padding mangle
-maker: Babcook,germany
-type:5805-1995, Auftr number-165595 0294175)
* " J " box.
*Roller guider( Bianco)
* 6 chambers
*Cooling fan
* Plaiter

1 Bruckner stenter - 1984
320cm working width, Kuester padder type 222.53/320, vertical pin only chain, 5 compartments,
overfeed, Mahlo unit, steaming section in entry, gluing and trimming including centre trimming,
cooling zone, batching & plaiting.oil heated without boiler.

TERRY WEAVING LOOMS

6 NOS VAMATEX MADE SP 251 RAPIER TERRY LOOMS
YEAR 1990
WORKING WIDTH 360
EQUIPED WITH 8 LEVERS CAM MOTION, 8 LEVERS INSTALLED
SINGLE BEAM(S)
ACCESSORIES PER MACHINE:
PRE WINDERS AT 1200 1
2+2 WARP BEAMS OF 80/100MM FLANGE DIAMETER
8552 DROPERS 8552 HEALD WIRES
2 CLOTH ROLLERS

8 pcs SULZER P7100 B 360 N2 EPQ D1 , YEAR 1996
2 COLOR CAM MOTION WITH 10 LEVERS

6000 DROPERS
6000 HEALS WIRES
8 HEALD FRAMES
2 WEFT ACUMULATORS
CENTER AND SIDE TUCKING
ELECTRONIC LET-OFF
DOUBLE WIPROLL
SPLIT BEAM
1.5 SETS WARP BEAMS
1.5 SETS CLOTH ROLLER

CIRCULAR KNITTING M/Cs

PAILUNG

No of m/c Mc Dia Guage Feeder Type of M/c YEAR
======== ====== ===== ====== ========= =====

01 19inc. 18, 20,24 56 S/J 1992

02 20inc. 20,24 60 S/J 1993

02 22inc. 20,24 66 S/J 1993

01 23inc. 18,20,24 68 S/J 1992

02 24inc. 20,24 72 S/J 1993

01 26inc. 20,24 78 S/J 1992

02 30inc. 20,24,28 90 S/J 1993

01 30inc. 18 90 3-end Fleec 1992

01 32inc. 18 102 3-end Fleec 1993

01 32inc. 18 106 3-end Fleec 1993

02 18inc. 14,16 36 Rib 1992

FUKUHARA

1)S/J-PK 4-Track 24G X 26 DIA 78 FEED Year: 1994
2)S/J-PK 4-Track 20G X 26 DIA 78 FEED - Year: 1994
3)S/J-PK 4-Track 20G X 30 DIA 90 FEED - Year: 1994
4)S/J-PK 4-Track 24G X 30 DIA 90 FEED with LYCRA - Year: 1994
5)RIB- 14G X 30 DIA 60 FEED with LYCRA - Year: 1994
6)Fleece 3-Thread 18G X 30 DIA 90 FEED - Year: 1994

EXTRA CYLENDERS:
A) 28G X 30 DIA
B) 28G X 26 DIA

SPINNING :

CARDS

8 Trützschler DK 903,

yoc 1999, 2000 and 2001

type 9032201 + 9032203,

chute feed, CFD levelling, SFD levelling (Correctafeed and correctacard),

auto doffing, can size 40x 42

with 13 meter FBT feeder tube,

Complete with cans, etc.

7 Truetzschler Cards DK 715, 1985

with Chute feeder FBK 533
and coiler KA 1000

REF # : bt-6/12/05

RING SPINNING

Plant No. 1
14,000 spindles. Year 1991/92
Blow room - Rieter/Trutschler
Carding - Trutchler DK 740
Roving - Toyoda
Spinning - Toyoda linked with Murata winding

Plant no. 2
9,720 spindles, for fine count. Year 1990
Blow room/Cards - Trutschler
Drawing - Rieter
Roving/Spinning - Marzoli
Winding - Schlafhorst

Plant No. 3
4,448 spindles. Year 1980 - 1990
Blowroom/ Cards - Trutschler
Drawing - Schubert and Salzer
Spinning - Zinser
Winding - Schlafhorst

Plant no. 4
44,000 spindles. Year 1987 - 1981
No Blowroom
Carding - Crosroll
Combing/Drawing - Hara
Roving - Toyoda
Spinning - Zinser
Winding - Murata

Plant no 5
27,000 spindles Year 1990
Preparation Hollingsworth
Carding - Toyoda
Draw frames Hara
Spinning Toyoda
Winding - Murata

OPEN END SPINNING

Plant No. 1
1,120 rotors - all Rieter. Year 1996

Plant No. 2
2,000 rotors - Rieter Blowroom, Ellitex Drawframe and spinners. Year 1987

Plant No. 3
1296 rotors - Rieter Blowroom, Toyoda cards (1976), Schlafhorst spinning SE8. Year 1991 - 1993.

Plant no 4
1728 Rotors Year 1987
Blowroom Marzoli
Cards Marzoli C 300
Drawing Vouk
Spinning Savio Type FRS

WORSTED SPINNING

Plant no. 1
8,240 spindles. Year 1994 - 2001
Preparation and Combing - NSC
Spinning - Zinser and CSM
Winding - Savio
Twisting Murata

WORSTED YARN PROCESSING FOR HAND KNITTING YARNS
Year 1980s
Preparation /Combing NSC
Winding/twisting Fadis/Schlafhorst/Allma
Suerba Spirovap
Croon and Luck Balling

WOOLLEN SPINNING
Carding - Octir/Kyowa. Year 1980 - 1994
Muel Spinning - Bumsung/Kyowa. Year 1994
Ring spinning - Gaudino. Year 1989
Winders - Savio. Year 1996

LINEN (FLAX) WET SPINNING
3,696 spindles Complete Installation, mainly Mackie. Year 1990 - 1995

EMBROIDERY

One SAURER Schiffili / Shuttle Embroidery Machine - Model: S - 3540 HP - 15.5 Yards - 125 CM standard Tensioning Appartus Type X-27, Witha ll Standard Accessories & Essential Eqipements - Year: 2002

One Multi Head Tajima Embroidery machine - Model:TFGN - 920 - Emb; Space:330X1000 - Year:2003 -

A part from routine multi Head embroidery Jobs, this machine has few Special Attachments i.e: High speed Sequin Device to perform Staring Work - One Cord Knitting Machine & One Hi-Speed Cording Looping Device . Cord Knitting & Looping are never used since its importation and are still packed in their Original Packing .

The proposed machine is still Operational & available for sale with all its standard accessories & Spares.

1 Machine Lasser model MD1, YOC 2000, 14 Mtr,
Frame Height 125 CM, ATC Cut, 536 Needles, TOP shuttle, Saurer system (Left),
Embroidery length 15.80 Yards, Full set 4/4 shuttles.

1 Machine Lasser model MD2, YOC 2002, 20 Mtr,
Frame Height 125 CM, ATC Cut, 752 Needles, TOP shuttle, Saurer system (Left),
Embroidery length 22.20 Yards, Full set 4/4 shuttles .
Pictures & Prices available on request .

We lookforward to hear your further interest soon on above .

Kind regards ,
Fayyaz Ali Alwani
CEO

ALWANI TEXTILES MACHINERY

TEL : + (92-21) 491 1765 & 491 1766
CELL : + (92-300) 928 - 6586
FAX : + (92-21) 492 - 7149
WEB : www.alwanitextiles.com
E-mail : alwani@super.net.pk
atm12@super.net.pk

Author: Fayyaz Ali

SIR,
WE AR LOOKING FOR ONE SET OF AUTO CONER MACHINE PREFFERBLY 1995 AND ABOVE MAKE PRIORITY SCHLSFHORST AND MURATA MAGAZINE TYPE.AND WE ARE ALSO LOOKING FOR 20000 TO 30000 RING SPINNING PPLANT FOR SOME OF OUR CUSTOMER,IF ANY AVAILABLE,KINDLY SEND ME THE DETAILS.

THANKS AND REGARDS,
ASHWANI GARG.

Author: ASHWANI GARG

please email me more information about the winding machine and the spinning, the mader is schlafhorst.

LINEN (FLAX) WET SPINNING
3,696 spindles Complete Installation, mainly Mackie. Year 1990 - 1995
and more informatin about above frames.

many thanks,

Fei

Author: Fei